For those who are unfamiliar with the term, GPS stands for Global
Positioning System, and is a way of locating a receiver in three dimensional
space anywhere on the Earth, and even in orbit about it.
GPS is arguably one of the most important inventions of our time, and has
so many different applications that many technologies and ways of working
are continually being improved in order to make the most of it.
To understand exactly why it is so useful and important, we should first
look at how GPS works. More importantly, looking at what technological
achievements have driven the development of this fascinating positioning
system.
Signals
In order for GPS to work, a network of satellites was placed into orbit
around planet Earth, each broadcasting a specific signal, much like a normal
radio signal. This signal can be received by a low cost, low technology
aerial, even though the signal is very weak.
Rather than carrying an actual radio or television program, the signals
that are broadcast by the satellites carry data that is passed from the
aerial, decoded and used by to the GPS software.
The information is specific enough that the GPS software can identify the
satellite, it’s location in space, and calculate the time that the signal
took to travel from the satellite to the GPS receiver.
Using different signals from different satellites, the GPS software is
able to calculate the position of the receiver. The principle is very
similar to that which is used in orienteering – if you can identify three
places on your map, take a bearing to where they are, and draw three lines
on the map, then you will find out where you are on the map.
The lines will intersect, and, depending on the accuracy of the bearings,
the triangle that they form where they intersect will approximate your
position, within a margin of error.
GPS software performs a similar kind of exercise, using the known
positions of the satellites in space, and measuring the time that the signal
has taken to travel from the satellite to Earth.
The result of the “trilateration” (the term used when distances are
used instead of bearings) of at least three satellites, assuming that the
clocks are all synchronized enables the software to calculate, within a
margin of error, where the device is located in terms of its latitude
(East-West) and longitude (North-South) and distance from the center of the
Earth.
Timing & Correction
In a perfect world, the accuracy should be absolute, but there are many
different factors which prevent this. Principally, it is impossible to
ensure that the clocks are all synchronized.
Since the satellites each contain atomic clocks which are extremely
accurate, and certainly accurate with respect to each other, we can assume
that most of the problem lies with the clock inside the GPS unit itself.
Keeping the cost of the technology down to a minimum is a key part of the
success of any consumer device, and it is simply not possible to fit each
GPS unit with an atomic clock costing tens of thousands of dollars. Luckily,
in creating the system, the designers designed GPS to work whether the
receiver’s clock is accurate or not.
There are a few solutions. However the solution that was chosen uses a
fourth satellite to provide a cross check in the trilateration process.
Since trilateration from three signals should pinpoint the location exactly,
adding a fourth will move that location; that is, it will not intersect with
the calculated location.
This indicates to the GPS software that there is a discrepancy, and so it
performs an additional calculation to find a value that it can use to adjust
all the signals so that the four lines intersect.
Usually, this is as simple as subtracting a second (for example) from
each of the calculated travel times of the signals. Thus, the GPS software
can also update its’ own internal clock; and means that not only do we
have an accurate positioning device, but also an atomic clock in the palm of
our hands.
Mapping
Knowing where the device is in space is one thing, but it is fairly
useless information without something to compare it with. Thus, the mapping
part of any GPS software is very important; it is how GPS works our possible
routes, and allows the user to plan trips in advance.
In fact, it is often the mapping data which elevates the price of the GPS
solution; it must be accurate and updated reasonably frequently. There are,
however, several kinds of map, and each is intended for different users,
with different needs.
Road users, for example, require that their mapping data contains
accurate information about the road network in the region that they will be
traveling in, but will not require detailed information about the lie of the
land – they do not really worry about the height of hills and so forth.
On the other hand, hiking GPS users might wish to have a detailed map of
the terrain, rivers, hills and so forth, and perhaps tracks and trails, but
not roads. They might also like to adorn their map with specific icons of
things that they find along the way and that they wish to keep a record of
– not to mention waypoints; locations to make for on their general route.
Finally, marine users need very specific information relating to the sea
bed, navigable channels, and other pieces of maritime data that enables them
to navigate safely. Of course, the sea itself is reasonably featureless, but
underneath quite some detail is needed to be sure that the boat will not
become grounded.
Fishermen also use marine GPS to locate themselves and track the movement
of shoals of fish both in real time, and to predict where they will be the
next day. The advent of GPS fixing has also meant that co-operative fishing
has become much easier, where there are several boats all relaying their
locations to each other while they locate the best fishing waters.
Special kinds of marine GPS, known as fishfinders, also combine several
functions in one to help fishermen. A fishfinder comprises GPS and also
sonar, along with advanced tracking functions and storage for various kinds
of fishing and maritime information.
Getting Started
There are a few solutions available to consumers, ranging from
sophisticated in-car GPS systems, which feature voice guiding, powerful
dynamic route calculation, and the possibility to update the map from a CD.
Then there are handheld GPS devices, such as those from Magellan and
Garmin, which store a map inside, and are usually designed for outdoor use.
They cannot generally perform dynamic route calculation since they do not
have any road information, and leave the user to find their own way from A
to B.
Finally, a more recent solution has appeared on the market which uses the
power of a PDA to run the actual GPS software, and uses the interface
capability to attach a GPS receiver (antenna) to the unit. These tend to be
the cheapest, easiest to use and most flexible solutions, but are only as
rugged as the PDA to which they are attached.
Some recent systems can make use of a wireless Bluetooth
connection so that they can be used both as a personal navigation aid and
also inside a vehicle, by having several receives with Bluetooth
capabilities, and a single PDA.
About the Author:
Guy Lecky Thompson is a successful freelance writer offering guidance and
suggestions for consumers regarding GPS
tracking, GPS,
GPS maps and tracking
devices. His many articles give information and tips to help people save
money and make smarter decisions.
|
